January 1970 · Vol. 4 No. 3
January 1970 Magazine (Vol. 4 No. 3)
Magazine · 24 pages
Search this issue
January 1970 Magazine (Vol. 4 No. 3)
Captured text — scan page 16
Automatically captured text may contain recognition errors. Compare it with the original scan.
é) REINFORCED EPOXY BOAT CONSTRUCTION TIME
Frequently asked: "How long does it take to make a fiber-
glass boat?" And the answer is: "It depends." It depends
on factors such as type and size of the boat, condition of
the mold(s), experience and dedication of the personnel in-
volved, etc.
To get some idea of the time required to make a boat the
following figures may be used as a basis for extrapolation.
I make a 13.5' one-man kayak from a good quality MCA mold.
Most of the work was done without assistance, and my ex-
perience level could be described as moderate. The follow-
ing work breakdown applied:
Mold preparation (wax and put on
mold release 4
Cut glass to size and cut strips 5
Floor preparation 2
Gel-cote application 2
Major layup 3 layers 7.5 oz. glass cloth
plus 2 layers polyproplene for
hull; 2 glass plus 2 poly for
deck; 6 layers glass for seat 14
Trim hull and deck to flange 2
Trim seat and mold removal 1
Seam hull to deck 4
Boat removal and trim seam (external and
internal ) 5
sand and insert seats 2
Fill ends, insert grab loops and finish
sanding 2
Cleanup 2
TOTAL 45 man hours
Note: Time does not include effort to obtain materials
and molds. Finished weight was 31 pounds.
MATERIAL COST BREAKDOWN
18 yds. (60" width) 7.5 oz. fiberglass cloth
@ $1.25/ya. $22.50
14 yds. (60" width) polyproplene cloth
@ $1.60/ya. 22.40
2 gallons resin @ $8.50/gal. 17.00
MCA mold rental fee 20.00
Misc. (brushes, rollers, mold release, etc.) 10.00
Total Cost Approx. “$92.00
By Andy Westerhaus
16
Article contents & approved summaries (0)
No article summaries are available for this view.