← Back to The HUT

January 1970 · Vol. 4 No. 3

January 1970 Magazine (Vol. 4 No. 3)

Issue first-page cover

Magazine · 24 pages

January 1970 Magazine (Vol. 4 No. 3)

Captured text — scan page 19

Automatically captured text may contain recognition errors. Compare it with the original scan.

‘SSS SESS ESSE ESESSReqqReqag

ESTIMATING RIVER LENGTH

A do-it-yourself device to measure river length from a to-
pographic map relatively accurately can be easily construct-
ed. All that is needed is a pencil, paper clip and razor
blade.

Construction: Cut a thin disc from the pencil's eraser and
place a mark on the disc's perimeter to be used as a rota-
tion counter. The paper clip wire should be pushed thru
the center of the disc, thus forming a wheel with the paper
clip as its axle.

Use: The river's course should be traced with your device
while counting the number of revolutions on the disc. Like-
wise, the map's scale of miles should be traced thus yield-
ing the conversion factor between disc revolutions and ac-
tual miles.

For example: If one mile = 2.5 revolutions and the mea-
sured river length = 27.25 revolutions, then

length = (27.25 rev.) (1 mile/2.5 rev.) = 10.9 mi.
length = (27.25 rev.)(1 mile/2.5 rev.) = 10.9 mi.
by Andy Westerhaus

19

Article contents & approved summaries (0)

No article summaries are available for this view.