← Back to The HUT

May 1970 · Vol. 4 No. 7

May 1970 Magazine (Vol. 4 No. 7)

Issue first-page cover

Magazine · 28 pages

May 1970 Magazine (Vol. 4 No. 7)

Captured text — scan page 25

Automatically captured text may contain recognition errors. Compare it with the original scan.

Information on Epoxy:

The MCA epoxy has been reformulated to provide easier working
in many situations. The new formulation will cure faster, 3 to
5 hours or overnite at even relatively low temperatures 55° or 60%
This epoxy also will cure in thin layers, as for strip boats,
since many persons are now using epoxy resin for superior hardness
on wood and foam cored boats. The resin also is thinner (lower
viscosity) for greater ease of lay up for molded boats and gives
a reasonable pot life of 45 minutes to 3 hours depending on tem-
perature.

One doesn't get all these properties purely gratis, and some
procedural precautions are necessary;

1. These are two different liquids in the hardener container -
mix thoroughly for best results,

2. Be reasonably careful to accurately mix 1 part of hardner
to 2 parts of resin by volume. Epoxy is much more critical
this way than polyester,

3. Wear rubber gloves and work in a well ventilated area.

A few further tips:

1. Mixing the 2 hardener liquids is easier if both are warmed
slightly by perhaps floating the container over warm water,

2. If solid crystals form in the hardener warming 160° to 212°
212° F (boiling water) will disolve them and no harm will
result,

3. Be sure containers, brushes and rollers are dry, water in
uncured epoxy will severely affect it.

Bob Haug

Epoxy Materials
The MCA will have epoxy resin about the 20th of May. Shortly

after that, if should be available at both the North and South De-
pots

North Depot Cliff Lee (Phone 784-8202)
423 - 79th Way N.E., Fridley

South Depot Jerome Kress (Phone 929-6949)
5647 Wood Lane, St. Louis Park

Cost is $9.00 for 3/4 gallons (minimum quality)
15.00 for 1 1/2 gallons and up.

Available in 3/4, 1 iff, and 3 gallon units or multiples.

23

Article contents & approved summaries (0)

No article summaries are available for this view.