← Back to The HUT

February 1969 · Vol. 3 No. 4

February 1969 Magazine (Vol. 3 No. 4)

Issue first-page cover

Magazine · 20 pages

For the full-resolution original, use Open PDF above. Your browser handles PDF zoom and navigation.

Scan page 7 of February 1969 Magazine (Vol. 3 No. 4)
Searchable text for scan page 7

3. Inversion, particularly in the bow, to partially
correct the awkward paddling angle the bowman
is subjected to. The result wil probably be
increased drag and, therefore, a slowe: canoe,
but at the same time this may be comperseted for
by the fact that.this is essentially a 1' ft.
canoe in dimension, except in length, ar. an
elongated middle section defined by the ~-wo 16
center templates.

The wood is northern white cedar (obtained only by
chance and after many phone calls). Epoxy resin will
be used with 7 oz cloth. I put this on the exterior
of my 16 ft 01d town guide model after stripping off
the polyester coating, and Bob Haug is right -- it
is about 30% tougher. I hit rocks last year that
would have delaminated the polyester but the epoxy
suffered no delaminations and less severe scratching.

Anyone interested in seeing the project can call me

at 929-7380 after 6 pm or leave a message at 824-0667.

WEDGE STRIPS ARE 3/g” THICK,
ANB SANDED TO PROPER CURVATURE A.

EATMENT OF BoW OR STERN IN
A. CRePARATION FOR APPLYING BARK. ___

AE ACTUAL CANOE HAS | MORK STAIT
BETWEEN NUMBERS 4¢6 IN DIAGRE
SEQUENCE IS s STRIP, 2 BLANK SPACES . 3

THE STEM Is A 16/GUIDE MODEL STEM, BUT 1S

ENLARGED ALONG THE OUTER CURVE TO THE

EXTENT OF THETHICKNESS OF THE RIB YOU

CHOSE FORTHE CANOE. /6'GUIDE MODEL 8. WEDGE DESIGN.

DIMENSION IS SHOWN BY DGTTED LINE IN

STEM. LEADSTRIP FROM RIB TO STEM (tS OPTIONAL}

WT >
LEAD STRIP \ SUPPORTED BY CUSTOM

tt #—RIB \ FITTED weves ——
oF I ———— ==

it
t—F Yo —I
al]
ad -—
——
Cc ENLARGED — STEM AND
~ RIB ALLIGNMENT FOR
LAYING KEES STRIP. D

Article contents & approved summaries (0)

No article summaries are available for this view.