February 1985 · Vol. 21 No. 2
February 1985 Magazine (Vol. 21 No. 2)
Magazine · 32 pages
Search this issue
February 1985 Magazine (Vol. 21 No. 2)
Captured text — scan page 11
Automatically captured text may contain recognition errors. Compare it with the original scan.
BUILDING
BUILDERS CORNER
The MCA is now a dealer for West System products. West System
resin and other related products are, in my opinion, the best epoxy products
for use with our wooden boats. The epoxy resin is more expensive than
polyester resins, and all epoxies are. They are considerably stronger,
therefore creating a better boat. When used properly, the West System resin
should go further per gallon, reducing the cost difference between poly and
epoxy.
We have in stock a good book regarding this subject. Anyone who is
considering epoxy versus polyester on their next canoe should read it. I have
ordered several copies of the West System Technical Manual. This book sells
for $2.00, and it is a must if you plan to use West System products.
West System products are more than just resin. Their list of products
includes a variety of thickeners that let you use West System for everything
from adhesives to body putty. The West System Technical Manual is written
by the Gougeon Brothers, the founders of West System products. This book
gives the basics about uses of their products.
I would like to repeat, buy this manual and read it, then decide if you
wish to use West System products. My experience with this product is still
limited. I've patched several boats and helped glass one. One definite plus
that I've found is the lack of smell. Anyone who has glassed a poly boat
should appreciate the difference. One patch job that I did recently was done
at 45 °F. The resin was rather thick as I stirred it, but even at 45” it cured
just fine—try that with your poly.
Back to polys? Okay, as long as we are, the old argument about
priming keeps arising. I was a holdout; for years I lectured against priming.
Even after David Hazen's book was distributed I continued to badmouth
priming. I had been having good results without priming my hulls. I felt that
everyone should. Not everyone was. As Building Director, I get the calls
when things go wrong. We were finding a rash of starved spots on people's
boats. These are caused by the wood stealing the resin away from the cloth.
We were also having problems with the natural resins in the wood being
incompatible with our poly resin. David Hazen said so years ago, but it was
my good friend Bruce Kunz that made a believer out of me. He was turning
out boat after boat with nearly perfect finishes. Also the people buying
resin at his depot were having very good success doing it his way. It's hard
to argue against success. — Bob Brown, Building Director
The Fish Hook River, the major tributary of the Shell, flows from Fish Hook
Lake ten miles through Park Rapids and down to its mouth in the Shell.
Streams and Rivers of Minnesota —
Tom Waters.
HUT! fd!
Article contents & approved summaries (0)
No article summaries are available for this view.