November 1969 · Vol. 4 No. 1
November 1969 Magazine (Vol. 4 No. 1)
Magazine · 20 pages
Search this issue
November 1969 Magazine (Vol. 4 No. 1)
Captured text — scan page 15
Automatically captured text may contain recognition errors. Compare it with the original scan.
BUILDING
FIBERGLASS "TRICKS OF THE TRADE"
In the course of making fiberglass reinforced epoxy boats,
I have discovered a few ideas which may help other MCAers.
A large variable speed floor fan mounted in a window
provides exhaust ventilation for indoor work.
Polyethylene sheeting taped to the floor provides for
resin spillage and easy clean up.
Braces (to prevent the mold from rocking) nailed to a
sawhorse provide a good mild support.
Cutting straight glass strips can be done by pulling a
thread and cutting along the vacated thread line.
Use a number of longitudinal strips, eg. 2", 4" and 6"
strips, to stiffen the "keel line". In addition, more
strips are used to reinforce the stern.
A tall can, such as a 46 oz. juice can, provides a good
mixing container for epoxy. A punch is used to make inden-
A thick wire mixing attachment for a }" electric drill pro-
vides easy and thorough resin mixing.
Disposible paper towels save the frustration of wet, sticky
rags.
SPRAY SKIRT TRICKS
My wife has found that spreading a thin film of Vaseline on
the rubberized skirt material greatly enhances sewing ease.
Shock cord can be securely tied without a bulky knot by us-
ing a wipping of thin nylon cord wound over about two to
three inches of shock cord overlap.
Andy Westerhaus
19
Article contents & approved summaries (0)
No article summaries are available for this view.