May 1985 · Vol. 21 No. 5
May 1985 Magazine (Vol. 21 No. 5)
Magazine · 40 pages
Search this issue
May 1985 Magazine (Vol. 21 No. 5)
Captured text — scan page 14
Automatically captured text may contain recognition errors. Compare it with the original scan.
BUILDER'S CORNER
The GOUGEON BROTHERS ON BOAT CONSTRUCTION (available for
$20 from the MCA as part of our West System dealership) is reeommended
reading for the "serious builder."
The chapter on safety addresses the issue of saw dust and the human
body. Any of you who have read "Brown on Allergies" or who have been
around the MCA for a few years will know how important a subject this is.
Below, in somewhat condensed form, is what the Gougeon brothers
have to say on the subject.
"It doesn't take a doctor to tell us that breathing concentrated
amounts of dust is bad. And by definition, a boat shop is usually a dusty
place. For many years we breathed a lot of dust in our own boat-building
operations with no apparent problems, but after hearing of lung problems
(silicosis, asbestosis, byssinosis) that developed in other industries after long
periods of exposure, we began to be concerned about possible long-range
problems with our own situation.
We studied the available data and consulted several experts. Sur-
prisingly enough, the doctor we consulted was not nearly as concerned about
high dust levels as he was about having very healthy lungs that were capable
of dealing with high dust levels. Thanks to the lung's defense mechanisms—
the mucous and cilia, which catch foreign particles and propel them back
toward the nasal and oral passages—the lungs are capable of withstanding
ineredible abuse, but there are limits. Smoking, dry air, and excessive dust
work in concert to put extra demands on the lungs.
To avoid possible lung problems, you can stop smoking (cigarette
smoke introduces foreign particles and dries out the lungs), humidify your
breathing air to at least 40 percent (below 40 percent relative humidity is
harmful and a minimum of 60 percent is preferable), and minimize the
breathable dust that is produced in the boat shop. The following are
suggestions to minimize dust:
Set up a separate sanding area with its own exhaust fan. A temporary
wall of polyethylene sheet plastic works well.
2. Install dust collectors on your major dust making tools (table saw, planer,
power sander).
3. Perform more operations with cutting tools (such as a hand plane) rather
than abrading tools (such as sandpaper), which make more dust.
4. Wet sand rather than dry sand whenever practical.
5. Purchase a comfortable and effective dust mask, make sure that it fits
correctly and wear it whenever dust levels are high in the shop. In our
own shop, we utilize double cartridge face masks which can be modified
simply by changing cartridges to provide protection against either dust or
solvents. Very simple, effective and cheap face masks are available for
dust alone. One of the better types is the simple disposable pressed cloth
mask manufactured by 3M.
We had expected to find that wood dust would have a low hazard
potential, even when breathed in high concentrations. We had personally
known several old time woodworkers who had spent many years at their
trade and had taken little or no precautions against wood dust. Unfortunate-
ly, these old timers were probably lucky. Wood dust can not only cause lung
congestion problems, but can also be toxic, causing a number of problems
ranging from skin rashes to cancer.
Redwood dust, for example, is the cause of sequoisis, an acute illness
that resembles pneumonia. It usually appears within a few hours after
HUT! 14
r
in
Article contents & approved summaries (0)
No article summaries are available for this view.