September 1985 · Vol. 21 No. 9
September 1985 Magazine (Vol. 21 No. 9)
Magazine · 32 pages
Search this issue
September 1985 Magazine (Vol. 21 No. 9)
Captured text — scan page 26
Automatically captured text may contain recognition errors. Compare it with the original scan.
EDUCATION & SAFETY
SIMPLE FORMULA DETERMINES BOW SEAT PLACEMENT
Undoubtedly, the biggest problem with the factory-produced canoe is
the placement of the front seat. It just does not belong in the middle of the
canoe. Most canoes are designed and built by boat builders whose
preoccupation with stability under horsepower does not allow for the
lightness or maneuverability of the man-powered canoe.
Seats should be positioned as close as possible to the ends of the canoe.
Generally, the bow seat is placed first, then the rear seat is mounted so that
both the bow and stern draw the same depth. Some time ago in HUT!,
Janice and Janet Robidoux mentioned the simple proportion that ean be used
to position seats. The formula still holds firm as long as care is taken to
keep the bowman as close to the bow as his legs will allow. (Note:
measurements are to the front edge of the seat, as an approximation of the
center of mass of a paddler.) Here is the formula:
bowman's weight _ sternman's weight
distanee from bow (unknown) distanee from stern
or simply: sternman's weight times the
distance from the bow
bowman's weight
distanee from stern =
A properly-set bow seat makes a draw stroke more effective and less
ridiculous than one done from the center of the canoe. And, obviously,
every stroke becomes less painful as the gunnels are moved out of the way.
— Karl N. Ketter
|<— Bow ->| A Jk sTERN >|
CENTER
distance distance
from bow HINT: Measure from from stern
front edge of both the
bow and stern seats. Set
bow seat as close to bow
as comfortable.
HUT! 26
Article contents & approved summaries (0)
No article summaries are available for this view.