January 1987 · Vol. 23 No. 1
January 1987 Magazine (Vol. 23 No. 1)
Magazine · 36 pages
Search this issue
January 1987 Magazine (Vol. 23 No. 1)
Captured text — scan page 12
Automatically captured text may contain recognition errors. Compare it with the original scan.
BUILDERS CORNER - GUNNELS AND OTHER THOUGHTS
Recently, I wrote an article discussing glassing called "How Much
Is Enough?" I discussed keeping it light.
All too often I've seen well-built nicely glassed canoes that had
5 to 10 pounds too much wood. Ornate is fine, folks, but it won't
help much on a portage trail.
Again, let's ask how much is enough? The sizes and type of wood
should match up to the size of the boat. Most builders, both amature
and pro, err on the side of too much.
Some big names in canoe manufacturing seem determined to have
massive outwales; "keeps the water out of the boat" they try to tell
me. Let me abbreviate my reply--B.S. If you depend on the outwales
to keep the river out, you are in over your head.
An inch of outwale makes the boat 2 inches wider. You must
paddle over this wider beam. The hull could just as well be built
wider, that might help keep out water.
Outwales look keen, if you really feel you need them, keep them
minimum 3/8 x 3/4 inches, and round off the corners. I prefer a rail
1/4 or 3/16 x 1 inch, just a thin rub strip. See Fig. 1.
I really like the gunnel system first introduced to me by my
friend, Bruce Kunz. This "Kunz Gunnel" seems to do everything real
well. His system overlaps short gunnel sections, effectively
doubling the dimensions at places where thwarts and seats attach.
The attachment points are the key to a good system. Thwarts
rarely break, they break loose, due to poor attachment.
12 HUT!
Article contents & approved summaries (0)
No article summaries are available for this view.