← Back to The HUT

June 1987 · Vol. 23 No. 6

June 1987 Magazine (Vol. 23 No. 6)

Issue first-page cover

Magazine · 52 pages

June 1987 Magazine (Vol. 23 No. 6)

Captured text — scan page 19

Automatically captured text may contain recognition errors. Compare it with the original scan.

RIVER SURVEY FORM

The River Survey form and Gauge Locations included in HUT! this
month is a cooperative effort of the MCA and the Minnesota Department
of Natural Resources. The purpose of this survey is to provide a
corelation between river level gauge readings and canoeability on
rivers. This program was started after a tragic and avoidable death
occurred in the Banning rapids on the Kettle River. The following
article from the DNR explains river gauges and how to use them. If
canoeists will submit survey forms whenever they canoe rivers, a base
of information will be established that will permit the DNR to provide
accurate canoeability information to all interested persons.

RIVER GAUGES

Water level gauges on Canoe and Boating Routes in Minnesota are
primarily designed for the development of a more reliable river level
information system so that canoeists are provided with a safe and
enjoyable canoeing experience. The idea behind the river level
inventory program is that certain gauge readings can be related to a
general condition of the canoeability of that river or stretch of
river, and this information about all the Canoe and Boating Route
rivers can then be compiled and made available to the canoeist to help
them plan a canoe outing.

Since river level readings are to be used in relation to the
condition of the river, there is no uniform level that the gauge is
set at. Generally, DNR gauges are set so that the "0" mark is at a
low level of the river. The readings are then measured in feet and
tenths of feet above the "0" level, or if the "0" level is above the
water surface, an estimate is made as to how many feet below that
reading the water level is. Gauges are usually placed on bridge
supports in the main channel so that they are easy to read, and can be
checked on a regular basis by the public, and DNR field staff.

Since these gauges are set up in relation to their specific
location, there is no comparability between a gauge at one point and a
gauge at another point, or from river to river. At a specific river
location, a comparison is made from a certain river level reading to a
certain condition, i.e. gauge reading 4.5 = water level above normal,
class II rapids, good canoeability. Later in the season the gauge may
read 1.7 at the same point, indicating possibly exposed rocks, water
too low to canoe, etc. As more reading/condition reports are made, a
general profile of the river's canoeing conditions at various levels
can be formulated, and made available to canoeists through the DNR's
Outdoor Recreation Information Center.

The United States Geological Survey has some gauges along Canoe
and Boating Routes as well. Their gauges are set up so that the "0"
reading is tied into a certain level above sea level. Their readings
are then related to a certain discharge level and factors such as
runoff, mean annual flow, volume, etc., can be calculated and an
accurate flow system can be derived. The U.S.G.S. gauges are also set
up so that readings are in feet and tenths of feet.

The Corps of Engineers also provides river level gauges, and they
function in much the same way as the U.S.G.S. gauges do. Their intent
is to monitor river tributary levels so that accurate navigational
information can be made available to boat and barge traffic.

United States - Department of Interior
Geological Survey

United States - Department of the Army
Corps of Engineers

Minnesota Department of Natural Resources
Trails and Waterways

June 1987-HUT! 19

Article contents & approved summaries (0)

No article summaries are available for this view.