← Back to The HUT

October 1987 · Vol. 23 No. 10

October 1987 Magazine (Vol. 23 No. 10)

Issue first-page cover

Magazine · 32 pages

October 1987 Magazine (Vol. 23 No. 10)

Captured text — scan page 11

Automatically captured text may contain recognition errors. Compare it with the original scan.

LETTERS TO HUT!--PRODUCT REVIEW
HUT! Editor,

I thought readers of HUT! might be interested in reading this
letter which I recently sent to the U.S. distributor of Ally Pack
Boats. A brief introduction is in order. The Ally Pack Canoe is a
PVC skin over aluminum frame collapsible canoe. It packs up small
enough to be checked as regular airline baggage yet when assembled
forms a fairly rugged full size canoe. It can be assembled in 30
minutes, broken down in five. If you are planning floatplane trips
or don't have storage space or don't like roof racks, this might be a
good choice-even though it is expensive.

Dimensions according to the manufacturer:

Beam (max. 38") (Gunnel 37") (4" waterline 34")

Depth 14" Length 18'

Weight 52 Ibs. Capacity 830 Ibs.

My only experience is with the 18 ft. DR model. I wouldn't
recommend that anyone get the regular models because I think the
heavier fabric on the bottom is needed. I also would caution anyone
about using the canoe in heavy water without making at least some of
the modifications I mention--especially the lashings, the painter
attachments and the extra foam padding.

Sincerely, James V. Murphy
August 13, 1987
Mr. Alf Elvestad
Rt. 2, Box 165
Enfield, NH 03748

Dear Alf:

I just returned from a 580 mile trip down the Elk and Thelon
Rivers in Canada's Northwest Territories in my Ally 18 ft. DR. I am
writing to tell you how well the canoe performed.

We were a party of only two in a totally isolated area, so we
literally were trusting our lives to the canoe, and it certainly
didn't let us down. We paddled in conditions ranging from flat water
to class III+ rapids to big wind driven waves on the larger lakes.
The canoe performed superbly in the big stuff. The way that it
flexed and moved with the waves minimized water take-on and made us
stable and very maneuverable. We started out with 700 lbs including
ourselves and a month's worth of food. Because of the weight we had
to draw the canoe up on shore to load and unload. At first I worried
about abrading the skin but it showed very little wear even with this
constant abuse. When lining in shallows, it slid quite well over the
rocks--again showing little sign of wear. And most surprising, when
we encountered ice on the lakes at the end of the trip, we were able
to drag it across for 10 miles- again with little sign of wear.
Though hardly a race boat, the 18 foot length gives it surprisingly
good speed on flat water.

I made a number of modifications to the canoe before we left. I
reinforced the thwarts from side to side and top to bottom with
pieces of ash. I made my own seats including a sliding bow seat.
All intersections between longitudinal and latitudinal ribs were
lashed tightly with nylon seine cord. I attached painters just above
the waterline by threading a double wrapping of heavy nylon webbing
with two D rings, through the skin and around the bow and stern
pieces. The skin was reinforced at these points with an extra piece
of fabric and then the whole thing was sealed with silicone sealer.
I added extra foam by using pieces of blue 3/8" sleeping pads cut to
the correct shape. These extended all the way to each end and up to

ALLY PACK--CONTINUED ON PAGE 12
October 1987-HUT! 11

Article contents & approved summaries (0)

No article summaries are available for this view.