← Back to The HUT

November 1987 · Vol. 23 No. 11

November 1987 Magazine (Vol. 23 No. 11)

Issue first-page cover

Magazine · 32 pages

November 1987 Magazine (Vol. 23 No. 11)

Captured text — scan page 14

Automatically captured text may contain recognition errors. Compare it with the original scan.

This shows the complete scan page, including any other material on it.

BUILDERS CORNER--FAIRING UP THE FORMS

I draw a complete blank from some builders when I mention
fairing. Some omit this step completely, and the result is often a
misshapen boat. No amount of glitzy inlay or shiny varnish can make
a misshapen canoe look good in my mind,

The importance of fairing is inversely proportional to the
distance between forms, Boy that was a mouthfull, I ought to be
selling canoes, not building them. Seriously, on a boat with widely
spaced forms, like the Guide, fairing is not terribly important .
The forms are so far apart that a natural shaping of the strips
simply happens.

Why then would a designer put in more forms? Why have them
closer together when a-natural shape will happen with less? No two
Guides are the same. Very simply, their shapes vary from boat to
boat.

As the designer brings the forms closer to get better control of
of the shape, fairing becomes more and more important. A slight
error becomes more evident.

On my recent designs, the spacing is either 12" or 30 cm., with
this spacing you can maintain better contro] of the shape.

The most common errors in set-up result in either a tight bend
near the first form, or a wavy keel line. These errors show up on
the finished hul] and need not have happened. Fairing only takes a
few minutes and is a perfect time to detect any errors in your
set-up.

Fairing is a job best done with a helper. You and your helper
simply take a straight strip and lay it lengthwise anywhere on the
hull. The strip should touch all forms and end pieces at the same -
time. You may need a slight endward pull on the strip to make it
pull into place. Repeat this check every few inches around the hull,
do both sides.

If your hull] checks out and you find no tight bends anywhere,
consider yourself Jucky and start stripping in complete confidence.

More often, you will find that the strip missed somewhere in its
length, often near the ends. This is a sign that something is amiss.

When you find an error, check the other side. Is the boat
symetrical? You may simply have a form off center. If the error
proves to be symetrical, you then know that you either have a
misshapen form or one in the wrong position.

The easiest change to try is to move the suspicious form endways
or moving the end piece. A small change here can often correct the
problem.

Any suspicious forms should be checked against the original plan.
You may have made an error in transferring the shape from plan to
form.

When nothing else works, consider reshaping the form in question.
I do this commonly with my new designs, but you shouldn't have to on
a proven plan. When I do change the shape of a form, I do it a
Jittle at a time with a disk sander, taking the same amount off
either side.

On a symetrical hull, any error should show up in both ends.
Whatever fixed one end should be good for the other.

Check the keel line carefully, nothing shows poor workmanship
quicker than a 1/4" dish in the keel line, I've seen this far too
often. The error overshadows al] the nice things that you see. You
may wish to shim up the low forms to get a fair keel line.

Check again the line where the sides flow into the end, alJ too
often there is a tight bend near the first form. Don't be timid
about adjusting the position of the end piece. (Unless it’s a racing
canoe.) A slight adjustment in length can often solve a problem in

14 HUT!-November 1987

Articles (15) · Summaries (15)

Generated issue overview: November 1987 issue of HUT!, the monthly publication of the Minnesota Canoe Association. It includes association news and commentary, canoeing and canoe-building articles, trip reports, chapter material, race coverage, and member information. Ads, meeting notices, forms, and classifieds also appear throughout the issue.

Generated summaries are descriptions, not original captured text. Page-range text shows complete scan pages and may include neighboring material.

From the Bow

Title transcribed from original publication

Generated summary: Gustaveson introduces a new monthly MCA get-together, reflects on the association’s growth and his time as president, and thanks members while welcoming incoming president Burt Levy.

Open scan page 4

Read captured page 4 →

I'd Rather Be Canoeing

Title transcribed from original publication

Generated summary: The editor responds to a member’s criticism of HUT!, arguing that contributors write to share knowledge and experiences. Robinson invites more members to contribute and promotes the association’s monthly meetings.

Open scan page 4

Read captured pages 4–5 →

Cruise Notes

Title transcribed from original publication

Generated summary: Simpson recounts an MCA group’s four-day trip on Wyoming’s Snake River and emphasizes ferry maneuvers as essential whitewater skills. He recommends the Rapids Riders spring class for people learning whitewater paddling.

Open scan page 5

Read captured page 5 →

MCA Telephone Number

Title transcribed from original publication

Generated summary: The association announces that Jim and Verna Robinson have offered their telephone line as the official MCA number, with an answering machine identifying calls for the Robinsons or the association.

Open scan page 6

Read captured page 6 →

Color Cruise/Building Contest

Title transcribed from original publication

Generated summary: Robinson reports on the MCA’s St. Croix color-cruise weekend, including changing weather and plans, a shared chili meal, the canoe-building contest, and its first-, second-, and third-place winners.

Open scan page 6

Read captured page 6 →

Out of the City/On the Minnesota Border

Title transcribed from original publication

Generated summary: Szymanski proposes CIRCUMINNESOTA, a 2,350-mile journey around Minnesota’s border by canoe, bicycle, and on foot. Planned for April through September 1988, the project would explore the state and draw attention to its lands, communities, and environmental concerns without requiring travel far from home.

Open scan page 8

Read captured pages 8–9 →

Cliff's Corner--Getting a Grip on Things

Title transcribed from original publication

Generated summary: Jacobson discusses how grip and shaft shape, balance, blade width and shape, and paddle weight affect paddle comfort and performance. He describes customizing paddles and his preferences for different paddling situations.

Open scan page 12

Read captured pages 12–13 →

Builders Corner--Fairing Up the Forms

Title transcribed from original publication

Generated summary: Brown explains how to fair canoe-building forms before stripping a hull. He describes checking for tight bends, asymmetry, misplaced forms, and an uneven keel line, and advises continuing to check the hull’s curves during construction.

Open scan page 14

Read captured pages 14–15 →

Duluth Traveler

Title transcribed from original publication

Generated summary: In this Twin Ports chapter newsletter report, Freeman notes the chapter’s annual election, introduces new president Tim Sundquist, and comments on the chapter’s meeting attendance and upcoming year.

Open scan page 18

Read captured page 18 →

End of Season Race Summary

Title transcribed from original publication

Generated summary: The section introduces results from the Minnesota State Solo Canoe Championships, held September 23 on the St. Croix River. It notes warm, sunny weather, several swamped canoes caused by motorboat wakes, and the champions; race-result tables are not included as article content.

Open scan page 19

Read captured page 19 →

Whitewater Canoe and Kayak Chapter Newsletter

Title transcribed from original publication

Generated summary: The chapter report describes a change in officers and the reorganization of secretary, treasurer, membership, and cruise-director duties. It thanks outgoing officers and invites members to a November meeting and planning for the 1988 Whitewater Expo.

Open scan page 21

Read captured page 21 →

Perception, Inc. Announces Recall of Throwbags

Title transcribed from original publication

Generated summary: A product-safety announcement says Perception is recalling Kayaking Throwbags and Pro Throwbags shipped after July 10, 1987, because some rope may not float. Owners are advised not to use affected bags and to call the company for return instructions.

Open scan page 24

Read captured page 24 →

Isle Royale Sea Kayak Trip

Title transcribed from original publication

Generated summary: Rem recounts an eight-day sea-kayaking trip around Isle Royale’s northern end, describing the boat transport, weather, fishing, and difficulty finding campsites. He also shares permit and camping rules, chart and route suggestions, and advice for planning around wind and rough water.

Open scan page 26

Read captured pages 26–27 →

Autumn

Title transcribed from original publication

Generated summary: A short poem depicts autumn leaves falling after their display of color and contrasts that brief splendor with bare branches and the approach of winter.

Open scan page 27

Read captured page 27 →

Cruising--Some Suggestions

Title transcribed from original publication

Generated summary: Brown argues that MCA cruises should offer different pace levels so paddlers can choose trips suited to their abilities and preferences. He calls for more members to volunteer as cruise leaders and suggests organizing local, leisurely trips in 1988.

Open scan page 28

Read captured page 28 →