← Back to The HUT

December 1987 · Vol. 23 No. 12

December 1987 Magazine (Vol. 23 No. 12)

Issue first-page cover

Magazine · 32 pages

December 1987 Magazine (Vol. 23 No. 12)

Captured text — scan page 27

Automatically captured text may contain recognition errors. Compare it with the original scan.

This shows the complete scan page, including any other material on it.

I have steered folks wrong on this point in the past. Should you
have crystalized resin, try warming it up to 120 degrees F, stirring
it with a clean stick, then inverting the can to melt any crystals
off the cover,

We make every attempt to provide you, the customer with fresh
resin, don't store it forever and expect it to be good.

A friend of mine is a chemist by trade. In his duties he has
worked some with epoxy adhesives. He advised me on the importance of
mixing thoroughly. He said be sure to scrape the sides of the mixing
pot as the hardener will sometimes end up stuck to the side of the
pot rather than mixed in. Don't get violent as this wipes air into
the resin, but be thorough.

He also suggested holding the pot until the resin begins to warm
slightly in the pot. This has to shorten the pot life, but this
warming will reduce the viscosity of the resin allowing the molecules
to realign freely, thereby developing a better cure.

Hopefully sometime soon, we will be able to offer a builders
corner written by a chemist. This would remove much of the guesswork
that we have been going by.--Bob Brown

BUILDERS CORNER--USING LESS THAN PERFECT WOOD

In September and October of 1987, I stripped up three canoes,
I learned a couple things that I'd like to share,

‘It seems that no one cuts cedar trees taller than 16 feet. I have
only found 16 foot stuff and no clear lumber.

I bought lumber from Scherer Bros. Lumber in NE Minneapolis for
boats 21 and 22. I paid $128 for enough boards to build these two
boats. I rummaged through their pile of 1 X 6's, selecting only the
best from the entire pile.

As I sawed my strips I set all the perfect ones into one pile and
anything with any defect into a different pile. By the time I
finished sawing, I realized that the two piles were about equal size.

On boat 23, I pougnt strips from St. Croix Canoe Company. I paid
about a dollar per strip for the ready-cut stuff. I sorted through
them, bunching them according to color variations and set aside any
that were not perfect. Out of 80 strips, I had 26 with a knot or
ding or something leaving it less than perfect. Not good but
definitely better than the lumber that I had bought and sawed myself.

OK, now what am I going to do with all the knotty lumber? I
don't Jike to put knots into the hull], it can be done, but they can
cause problems glassing and they invariably cause a bump at the knot,
My answer is to break each strip at the knot and then lay out the
short pieces arranging them according to their new lengths. Now as I
build I can go to this pile and find a piece that is just long enough
to do the job. By doing this, very little goes to waste.

The way you Jay up a canoe will determine how many full length
strips you will need and how often you can fit in shorter pieces.

My good friend, Martin Van, (Eau Galle Boat Shop) strips canoes
following the procedure discussed in the book "Canoe Craft." Using
this technique, nearly al} the strips run full length in his boats.

I don't build canoes that way. I prefer to strip the way I was
taught by the MCA a few years ago. I prefer to lay up the sides with
horizontal full-length stuff and fill] in the ends and football area
with shorter pieces.

Qur new book suggests a system that we recommmend for stripping
most canoes. The first strip layed on either side is the shear line.
The next one wil] touch this shear strip in the center of the boat,
but it will be installed horizontally. See figure 1. The area
between these strips will be filled in later with short stuff.

BUILDING-~CONTINUED ON PAGE 28
December 1987-HUT! 27

Articles (14) · Summaries (14)

Generated issue overview: The December 1987 issue of HUT!, the monthly publication of the Minnesota Canoe Association, includes board-member columns, canoeing and conservation features, chapter news, building advice, and race results. It also contains advertisements, calendars, meeting minutes, classifieds, and membership materials, which are not treated as articles here.

Generated summaries are descriptions, not original captured text. Page-range text shows complete scan pages and may include neighboring material.

From the Bow

Title transcribed from original publication

Generated summary: The new president welcomes returning and new board members, describes MCA initiatives including support for a women's dragon boat team and Dan Szymanski's Minnesota-border journey, and urges members to contribute to the organization.

Open scan page 4

Read captured page 4 →

River Ramblin's

Title transcribed from original publication

Generated summary: The author argues for stronger action against pollution and acid rain, citing mercury, industrial discharge, and damage to lakes and rivers. He promises to continue discussing conservation issues and nature notes.

Open scan page 4

Read captured pages 4–5 →

Cliff's Corner--On Manitou's Good Side

Title transcribed from original publication

Generated summary: Cliff Jacobson recounts two costly canoeing mishaps during the summer of 1987 and the unexpected help he received on a remote trip to Saskatchewan. He reflects on avoiding overconfidence on rivers and appreciating the kindness of strangers.

Open scan page 6

Read captured pages 6–8 →

MCA to Be at the Minneapolis Annual Boat Show

Title transcribed from original publication

Generated summary: An announcement invites MCA members to volunteer at the January Minneapolis Boat Show and solicits help, canoe exhibits, and suggestions for the association's February Building Show.

Open scan page 8

Read captured page 8 →

We'd Rather Be Canoeing

Title transcribed from original publication

Generated summary: The authors set goals to retain and grow MCA membership, encourage participation in winter events, and maintain HUT! as a quality publication through member-submitted trip reports, reviews, and other contributions.

Open scan page 9

Read captured page 9 →

Board of Directors Meets at Camp Whatswrongwiththispicture

Title transcribed from original publication

Generated summary: A humorous introduction to photographs from the new MCA board's first assembly describes the meeting setting and offers mock-serious camera and darkroom specifications. The page 9 text also identifies people pictured on later pages.

Open scan page 9

Read captured pages 9–11 →

From the Treasurer

Title transcribed from original publication

Generated summary: Keith Bogut explains how he became MCA treasurer and outlines goals for an investment plan, long-term financial stability, and increased revenue. He also encourages members to participate in the association's monthly gatherings.

Open scan page 12

Read captured page 12 →

Education and Safety

Title transcribed from original publication

Generated summary: The column shares defensive-driving advice for gravel and bush roads, outlines the author's education and safety goals, and gives brief route descriptions for the South Fork Root River and the Cannon River, including access and trail notes.

Open scan page 14

Read captured pages 14–17 →

Goals for 1987-88

Title transcribed from original publication

Generated summary: The Rapids Riders president lists goals to continue whitewater instruction, promote safe paddling through organized activities, and give back to the chapter community.

Open scan page 16

Read captured page 16 →

So What Does Cruising Have in Store for Us in 1988?

Title transcribed from original publication

Generated summary: The cruising director proposes a committee and a member knowledge-sharing network, sets goals for publishing trip calendars several months ahead, and seeks input and reports about outdoor trips and winter activities.

Open scan page 22

Read captured pages 22–23 →

MCA to Sponsor Dragon Boat Team

Title transcribed from original publication

Generated summary: The article explains the MCA board's plan to direct Boat Show proceeds and canoe-raffle proceeds toward supporting a team competing in Taiwan and Hong Kong in 1988. It describes the fundraising approach and anticipated costs.

Open scan page 26

Read captured page 26 →

U.S. Dragonboat Team Report

Title transcribed from original publication

Generated summary: A report describes MCA members' dragon boat training in Dubuque, plans to bring the boat to Minnesota for spring training, and recruitment for the Taiwan and Hong Kong festivals.

Open scan page 26

Read captured page 26 →

Building--West System Update

Title transcribed from original publication

Generated summary: Bob Brown relays advice about epoxy resin and hardener shelf life, discoloration, crystallization, storage, and thorough mixing, including a suggested way to warm crystallized resin.

Open scan page 26

Read captured pages 26–27 →

Builders Corner--Using Less Than Perfect Wood

Title transcribed from original publication

Generated summary: Bob Brown explains how to sort and use imperfect cedar strips when building a canoe, including breaking strips at knots, arranging shorter pieces, and fitting strips around the canoe's football-shaped hull area to reduce waste.

Open scan page 27

Read captured pages 27–28 →