← Back to The HUT

December 1987 · Vol. 23 No. 12

December 1987 Magazine (Vol. 23 No. 12)

Issue first-page cover

Magazine · 32 pages

December 1987 Magazine (Vol. 23 No. 12)

Captured text — scan page 28

Automatically captured text may contain recognition errors. Compare it with the original scan.

BUILDING--CONTINUED FROM PAGE 27

Fill i ue Short

Some time ago I described a technique that I called Ketter Caper.
I have used a variation of this technique on every boat I've built
since,

On many of the racing canoe designs, the football] shaped area is
really more of an elongated diamond shape. It is nearly impossible
to Jay strips around this sharp corner of this diamond and still have
them lay flat. Karl taught me to end the strips near the center,
running them straight and fitting them into the curve created by the
previous strip (See Fig 2). The strips making up the turn of the
Sling orean dovetail together near the center of the hull] but they do

ay flat.

—fdge Jit hl

On my more recent boats, I have learned to Jay a straight strip
around the perimeter of the footbal] actually creating a diamond
shape. All of the fore and aft pieces in the football] have a
straight cut on both ends rather than having to fit each piece into
the curved edge of the football]. It takes time to fill this straight
piece, but it saves time in the complete hull.

Got all that? Clear as mud, right? To make a long story short,
all the pieces that I've just discussed wil] come out of your pile of
"Jess than perfects." With a little pre-planning, you will find that
nearly everything except the knots can fit somewhere into the job.
--Bob Brown

28 HUT!-December 1987

Article contents & approved summaries (0)

No article summaries are available for this view.