← Back to The HUT

January 1988 · Vol. 24 No. 1

January 1988 Magazine (Vol. 24 No. 1)

Issue first-page cover

Magazine · 36 pages

January 1988 Magazine (Vol. 24 No. 1)

Captured text — scan page 6

Automatically captured text may contain recognition errors. Compare it with the original scan.

This shows the complete scan page, including any other material on it.

BUILDERS CORNER--TRANSFERRING PLANS

Some of our would-be-builders are at a loss when it comes to
converting our plan into a usable set of forms.

On any MCA plan, all of the forms are drawn from a center line
showing the shape of a half of the form. Converting these lines on a
plan to plywood forms is.not terribly difficult if you make cardboard
patterns first, ;

I have developed a system that works well for me. I fold the
plan backward, creasing it at the center line of the forms drawn on
the plan. Care should be used to get this crease right on the line.

I next insert a piece of posterboard into this fold, making sure
that the straight edge rests against the crease. Cover the cardboard
with carbon paper, and trace around one of the form lines (any one.)

I then remove the cardboard and cut out the half pattern with
shears, check the pattern against the plan, and if satisfied, 1 label
the pattern with both station, number and boat name.

I repeat this operation with all of the forms, then uncrease the
plan and do the same thing for the end pieces. They probably will
have a different base line.

You now have a good set of patterns. Simple, wasn’t it? The
next step is to transfer these patterns to the wood that you plan to
use for forms.

3/4" plywood makes excellent forms, 5/8" is acceptable. A single
sheet of plywood will produce a set of forms for most of our boats.

I start by laying out all my
lines on the plywood before I
begin sawing. I start with the
largest forms first, and lay ~
them out around the outside of
my plywood sheet. I lay out a Cedar SLTLIS
line with a square and draw, a
centerline at right angles to * CLEAR RED CEDAR *

the edge of the board. I now 16 feet long
Jay my pattern against this '
centerline and bring the top out enough for an 18
to oe edge ka the Hebel hold it canoe
firmly in place and draw around
the pattern. I next flip the square edge ° 83
pattern over and draw the other bead & cove $103
half.

I cut my forms with a saber * x
saw. A band saw works well if . GUNWALES .
you have one available. I saw white ash strips
the forms about 1/16" to 1/8" 20 feet long

oversize, then sand them with a
disk sander until the line just

disappears. ~
As you complete each form, St. (roix
check it against the plan. When
satisfied, label it as you did (a
with the pattern, anoe
I like to carry my center

line around to the other side of (Ompany

the form, this can be helpful

various widths

when you start setting the forms 3250 Colfax Ave. No.
up a yor perenghanks Jneb you Minneapolis, MN 55412
get ready to set your forms up

on the strongback, which will be ; (618) 521-0587

covered in the February HUT!
--Bob Brown

6 HUT!-January 1988

Articles (13) · Summaries (13)

Generated issue overview: January 1988 issue of HUT!, the monthly publication of the Minnesota Canoe Association. The issue includes association updates, canoe-building advice, conservation commentary, paddling features, race reports, chapter news, and event information. Pages 18–20 have little or unreadable OCR text.

Generated summaries are descriptions, not original captured text. Page-range text shows complete scan pages and may include neighboring material.

FROM THE BOW

Title transcribed from original publication

Generated summary: The president reports on recent MCA meetings and outreach, previews upcoming programs and the boat show, and notes fundraising and equipment matters.

Open scan page 4

Read captured page 4 →

EDUCATION AND SAFETY

Title transcribed from original publication

Generated summary: A commentary reviews a new canoe-sport publication and argues for the MCA's established terms for efficient paddling and freestyle canoeing.

Open scan page 4

Read captured pages 4–5 →

BUILDERS CORNER--TRANSFERRING PLANS

Title transcribed from original publication

Generated summary: Bob Brown explains how to make cardboard patterns from canoe plans and transfer them to plywood to create forms for building a canoe.

Open scan page 6

Read captured page 6 →

SKI TRIP IN JANUARY

Title transcribed from original publication

Generated summary: George Skinner describes the appeal of a January trip to Great Lakes Lodge for skiing, snowshoeing, and winter recreation, and invites readers to contact him about trips.

Open scan page 8

Read captured page 8 →

RIVER RAMBLIN’S

Title transcribed from original publication

Generated summary: The column raises safety concerns about hunting near the Rum River and calls for support for a local safe-shooting ordinance. It also discusses military overflights over the Boundary Waters and environmental concerns, including waste incineration and recycling.

Open scan page 10

Read captured pages 10–11 →

CLIFF’S CORNER--MINNESOTA BRAINS

Title transcribed from original publication

Generated summary: Cliff Jacobson argues that skilled paddlers can use a versatile, reasonably sized solo canoe rather than owning several specialized boats, and discusses canoe length, performance trade-offs, and fabric covers.

Open scan page 14

Read captured pages 14–15 →

I’D RATHER BE CANOEING

Title transcribed from original publication

Generated summary: A brief note says longtime MCA member Walt Jones is living in a nursing home and welcomes visits and cards from paddling friends.

Open scan page 21

Read captured page 21 →

NEWSLETTER OF THE LONG DISTANCE CANOE RACERS

Title transcribed from original publication

Generated summary: A discussion of a ski-racing presentation compares canoe-racing and cross-country ski training, emphasizing aerobic effort, coordinated whole-body movement, posture, rhythm, and coaching.

Open scan page 24

Read captured pages 24–25 →

RACE RESULTS

Title transcribed from original publication

Generated summary: Tom Nolz reports on local canoe-racing events, including the Phalen Lake series, the Hoigaard’s Canoe Derby, and the Mississippi Classic. The article includes race-result tables, which are not summarized as separate articles.

Open scan page 25

Read captured pages 25–28 →

THEY LAUGHED WHEN I SAT DOWN TO ROW MY CANOE

Title transcribed from original publication

Generated summary: Mark Loerch describes using oars to maneuver a canoe through downstream rapids and outlines a method for steering around rocks while moving through rapids.

Open scan page 28

Read captured page 28 →

CIRCUMINNESOTA UPDATE!

Title transcribed from original publication

Generated summary: Dan Szymanski updates readers on preparations, support, and participation for CircumMinnesota, a planned statewide journey by canoe, kayak, bicycle, and on foot. The update includes a tentative route schedule and mileage totals.

Open scan page 29

Read captured pages 29–31 →

HOW LATE INTO THE AUTUMN DO YOU CANOE?

Title transcribed from original publication

Generated summary: Bob Brown recounts a late-autumn paddle on Lake Rebecca, describing the quiet lake, wintering birds, and the weather that followed his outing.

Open scan page 32

Read captured page 32 →

FILMS TO SEE

Title transcribed from original publication

Generated summary: George Skinner recommends films about Dorothy Molter and Bill Mason, describing “Waterwalker” as an evocative account of a solo canoe trip and the value of wilderness.

Open scan page 32

Read captured page 32 →