May 1988 · Vol. 24 No. 5
May 1988 Magazine (Vol. 24 No. 5)
Magazine · 56 pages
Search this issue
May 1988 Magazine (Vol. 24 No. 5)
Captured text — scan page 18
Automatically captured text may contain recognition errors. Compare it with the original scan.
BUILDERS CORNER--IN SEARCH OF THE PERFECT STRONGBACK
The boat builders of antiquity didn't need a strongback. Their
boats were carved out of a single log. As boats got bigger, they
developed ways of fastening three logs together with trunnels and
hewed a boat of these. As boats became ships, it was necessary to go
to five logs, then seven.
Ships were built this way for a thousand years, maybe even
fifteen hundred. Eventually, all the Cedar was logged off the hills
of Lebanon and a new system had to evolve.
In the early years of the Roman Empire, frame and plank
constructions evolved. The system that developed was used to build
larger and larger ships until the advent of the steel hull.
These plank and frame builders still started with a log, only now
they moved it to the building sight, blocked it up and squared it
off. This became the strongback. Frames, step and transom were
attached to this timber. They called this piece the keel.
The early builders built their frames plenty big, then faired
them down to fit the planking. They were still wood sculptures.
Lofting evolved in the eighteenth and nineteenth century. This
was necessary so larger ships could be built. Some of this skill
trickled down to small craft builders and suddenly frames could be
made nearly to shape before assembly.
About the time small craft builders learned to loft, their
vessels got much lighter, and some builders started building boats
bottom side up. Now we have covered four thousand years rather
quickly, what next?
Most upside down builders fastened their frames directly to the
shop floor. Builders of duckers, canoes, etc. raised the floor to
bring the work up to a comfortable height; thus, the building table.
The table idea evolved into a ladder type strongback. Many
builders today still use a ladder of table to build boats. I feel
that it is over-kill for canoes. See Fig. 1. Much more material is
required to produce the forms. This system works, but I don't
recommend it for a builder planning a boat or two.
Form
-—
ledder 7;
Stronp bak = |
A a
en TES | of
form
Lanxinoted evr
aAXvds ~
18 HUT!-May 1988
Article contents & approved summaries (0)
No article summaries are available for this view.