← Back to The HUT

October 1988 · Vol. 24 No. 10

October 1988 Magazine (Vol. 24 No. 10)

Issue first-page cover

Magazine · 44 pages

October 1988 Magazine (Vol. 24 No. 10)

Captured text — scan page 18

Automatically captured text may contain recognition errors. Compare it with the original scan.

This shows the complete scan page, including any other material on it.

BUILDERS CORNER

To those of you who saw it being built, or worked on it at
Minneapolis Boat Show or MCA Building Show, the Peregrine ‘86 is
finished. The net result is a 17'-7" canoe that weighs 53 pounds.
It has epoxy resin outside, polyester inside; a sliding bow seat and
rear foot braces. Bob Brown says it still needs a front foot brace.
One of these days I'11 get around to putting one in.

It is necessary, when building a canoe, to understand and respect
the properties of the materials being worked with. I have
occasionally been receiving calls from members who are having
problems with strips pulling off of the forms when they are going
around the chine. They are often using the technique of working the
strips continuously to the center of the canoe, without using a
football. It is not possible to arbitrarily select a method of
stripping a canoe up ‘without considering the design and types of
curves it has. The previous technique will work on canoes with
smooth flowing lines and no radical curves such as the Explorer or
Pirate. It is necessary to use a football and, possibly what the MCA
Building Book.refers to as the Ketter Caper when building canoes with
extreme curves. An extreme example of this is the Sairy Gamp that
Bob Brown built. It has strips running in about four different
directions because it has such short, tight curves. If. something
isn't working, don't force it. Stop and think why it isn't working,
and adapt your technique.

The people in the MCA have developed several successful methods
of butiding canoes. It is possible to experiment with and develop
new techniques--that can be part of the fun of building. New
techniques are a process of trial and error and it is reasonable to
expect some failure.

One of the things I wanted to find out when building the
Peregrine was wether polyester resin would bond strongly enough to
the wood that it would be possible to glue blocks to sides of the
canoe with epoxy and mount seats on them without having the polyester
delaminate. This will become clear after long term use.

I have discovered a couple of things in the process. Epoxy will
bond very well to cured polyester. Polyester cures in an anaerobic
state. If unwaxed resin is used, it is necessary to scrub off the
uncured resin with acetone. If waxed resin is used to cure the
polyester, it is necessary to remove the wax. When I loaned the
canoe to Bob to try it at rookies, some of the blocks let loose after
about 1/4 mile. Live and learn.

The interior of the caone is typically the most difficult to
finish as it is full of concave curves and nothing sands concave
. curves well. I tried a new technique and used a cabinet scraper to
finish the wood in these areas. This is a rectangular piece of
metal, it has no bevel, it is held perpendicular to the wood and cuts
on a draw stroke. It is good to grind on of the narrow ends to the
curve of the chine and it can then be used to scrape the chine. It
was also useful in the bow and stern of the canoe, where it could be
drawn perpendicular to the grain of the wood to kind of shred and
then the wood could be smoothed out by using the scraper like a
plane: pushing it forward, with the grain.

West System has a number of additives that modify their epoxy to
give it useful working properties. Some of the additives are:
microballoons, collodial silica, various filleting blends and
graphite powder. Microballoons can be used to create a lightweight,
sandable surface that is good for filling the ends of the bow and
stern. Collodial silica jis thixotropic, it thickens the mixture
while still allowing it to flow enough to penetrate other surfaces.
It leaves a very hard, abrasion resistant surface. It is often used

18 HUT!-October 1988

Articles (16) · Summaries (16)

Generated issue overview: October 1988 issue of HUT!, the monthly publication of the Minnesota Canoe Association. The issue contains canoeing history and trip narratives, editorial and chapter reports, canoe-building and paddling advice, and organizational material, advertisements, event listings, and forms.

Generated summaries are descriptions, not original captured text. Page-range text shows complete scan pages and may include neighboring material.

TRIBUTE TO A FRIEND--DOUG SUMNER

Title transcribed from original publication

Generated summary: A tribute to Doug Sumner describing his dedication to canoe racing, coaching, and canoe trips, his recent national-championship success with Explorer Post 301, and his death in a car accident.

Open scan page 4

Read captured page 4 →

THE PASSING OF A GREAT CANOEIST--WALT JONES

Title transcribed from original publication

Generated summary: A memorial notice recalls Walt Jones's love of paddling and his service as MCA president in 1976 and 1977, and says a fuller account would appear in a later issue. It introduces two reprinted columns by Jones.

Open scan page 4

Read captured page 4 →

HOW TIME FLIES WHEN YOU ARE HAVING FUN

Title transcribed from original publication

Generated summary: A first-person hunting and canoeing reminiscence recounts getting caught on the Flambeau River after dark, spending the night by a fire, and eventually finding his uncle's cabin in the morning.

Open scan page 4

Read captured pages 4–5 →

WOULD YOU BELIEVE IT?

Title transcribed from original publication

Generated summary: A humorous mock origin story attributes the invention of angling to a Roman whose broken suspenders accidentally cast a cheese-baited safety pin into the Nile.

Open scan page 5

Read captured page 5 →

THE HISTORY OF STRIP CANOE BUILDING IN MINNESOTA

Title transcribed from original publication

Generated summary: A history of canoe construction in Minnesota, tracing strip-canoe development through early racing canoes and the work of builders including Jessie Tibbets, Eugene Jensen, Tom Estes, and Irvin C. (Buzz) Peterson.

Open scan page 6

Read captured pages 6–7 →

FROM THE BOW

Title transcribed from original publication

Generated summary: The MCA president discusses a proposed Lake Phalen rowing, canoe, and kayak training facility, a Mississippi River cleanup, Rapids Riders training programs, upcoming MCA events, and the formation of a Women's Chapter.

Open scan page 8

Read captured page 8 →

CIRCUMINNESOTA

Title transcribed from original publication

Generated summary: A progress report from a Minnesota paddling journey describes kayaking and canoeing at Lake of the Woods, the Rainy River, Voyageurs National Park, the Boundary Waters, and Lake Superior, with reflections on wilderness protection.

Open scan page 10

Read captured pages 10–11 →

TRIP REPORT: TAIGA AND TUNDRA

Title transcribed from original publication

Generated summary: A northern expedition report follows a group traveling from Manitoba toward the Taiga-Tundra transition and tundra. It recounts challenging weather, portages, lakes, rapids, wildlife, campsites, and the trip's lasting impression on the travelers.

Open scan page 12

Read captured pages 12–15 →

INTERPRETATIONS AND PERSPECTIVE

Title transcribed from original publication

Generated summary: In a letter to HUT!, Cliff Jacobson responds to a debate about the perfect canoe and different paddling styles, recounting boats he has owned and defending the value of wilderness canoeing. An editor's reply follows.

Open scan page 16

Read captured pages 16–17 →

BUILDERS CORNER

Title transcribed from original publication

Generated summary: A canoe-building column discusses the completed Peregrine '86 and offers practical guidance on strip placement around tight curves, polyester and epoxy bonding, interior finishing, epoxy additives, and abrasion-resistant graphite coatings.

Open scan page 18

Read captured pages 18–19 →

NEWSLETTER OF THE WHITEWATER CANOE AND KAYAK CHAPTER

Title transcribed from original publication

Generated summary: A Rapids Riders chapter report announces a meeting and slide presentation, explains a change of meeting venue, and summarizes discussions of elections, first aid, instructor training, river rescue, and whitewater racing.

Open scan page 28

Read captured pages 28–29 →

NEWSLETTER OF THE LONG DISTANCE CANOE RACERS

Title transcribed from original publication

Generated summary: A Long Distance Canoe Racers chapter report notes efforts to promote canoeing and develop a Phalen Park racing and training facility, recognizes rookie racer Terry Daley, reviews the season, and remembers Doug Sumner's contributions.

Open scan page 29

Read captured page 29 →

NEWSLETTER OF THE TWIN PORTS CHAPTER

Title transcribed from original publication

Generated summary: A Twin Ports chapter report recounts recent paddling outings, including a BWCA trip with a young granddaughter, and shares a personal note about canoeing and a garage project.

Open scan page 30

Read captured page 30 →

A MODEST PROPOSAL

Title transcribed from original publication

Generated summary: A humorous essay uses the author's experiences rafting among African wildlife to propose importing hippos and crocodiles to make MCA whitewater instruction more exciting and challenging.

Open scan page 31

Read captured pages 31–33 →

MISUSE OF BENT SHAFT PADDLE

Title transcribed from original publication

Generated summary: A technique column explains efficient bent-shaft paddle strokes, cautions against carrying the stroke too far back or using the paddle for a J-stroke, and discusses appropriate paddle length and limitations.

Open scan page 34

Read captured page 34 →

CLIFF'S CORNER--EATIN' CROW AGAIN

Title transcribed from original publication

Generated summary: Cliff Jacobson describes testing a Gore-Tex rain jacket after earlier disappointing experiences, reporting that the garment stayed waterproof during extended wet-weather use. He also discusses the test conditions and related rainwear.

Open scan page 38

Read captured pages 38–39 →