← Back to The HUT

October 1988 · Vol. 24 No. 10

October 1988 Magazine (Vol. 24 No. 10)

Issue first-page cover

Magazine · 44 pages

October 1988 Magazine (Vol. 24 No. 10)

Captured text — scan page 18

Automatically captured text may contain recognition errors. Compare it with the original scan.

BUILDERS CORNER

To those of you who saw it being built, or worked on it at
Minneapolis Boat Show or MCA Building Show, the Peregrine ‘86 is
finished. The net result is a 17'-7" canoe that weighs 53 pounds.
It has epoxy resin outside, polyester inside; a sliding bow seat and
rear foot braces. Bob Brown says it still needs a front foot brace.
One of these days I'11 get around to putting one in.

It is necessary, when building a canoe, to understand and respect
the properties of the materials being worked with. I have
occasionally been receiving calls from members who are having
problems with strips pulling off of the forms when they are going
around the chine. They are often using the technique of working the
strips continuously to the center of the canoe, without using a
football. It is not possible to arbitrarily select a method of
stripping a canoe up ‘without considering the design and types of
curves it has. The previous technique will work on canoes with
smooth flowing lines and no radical curves such as the Explorer or
Pirate. It is necessary to use a football and, possibly what the MCA
Building Book.refers to as the Ketter Caper when building canoes with
extreme curves. An extreme example of this is the Sairy Gamp that
Bob Brown built. It has strips running in about four different
directions because it has such short, tight curves. If. something
isn't working, don't force it. Stop and think why it isn't working,
and adapt your technique.

The people in the MCA have developed several successful methods
of butiding canoes. It is possible to experiment with and develop
new techniques--that can be part of the fun of building. New
techniques are a process of trial and error and it is reasonable to
expect some failure.

One of the things I wanted to find out when building the
Peregrine was wether polyester resin would bond strongly enough to
the wood that it would be possible to glue blocks to sides of the
canoe with epoxy and mount seats on them without having the polyester
delaminate. This will become clear after long term use.

I have discovered a couple of things in the process. Epoxy will
bond very well to cured polyester. Polyester cures in an anaerobic
state. If unwaxed resin is used, it is necessary to scrub off the
uncured resin with acetone. If waxed resin is used to cure the
polyester, it is necessary to remove the wax. When I loaned the
canoe to Bob to try it at rookies, some of the blocks let loose after
about 1/4 mile. Live and learn.

The interior of the caone is typically the most difficult to
finish as it is full of concave curves and nothing sands concave
. curves well. I tried a new technique and used a cabinet scraper to
finish the wood in these areas. This is a rectangular piece of
metal, it has no bevel, it is held perpendicular to the wood and cuts
on a draw stroke. It is good to grind on of the narrow ends to the
curve of the chine and it can then be used to scrape the chine. It
was also useful in the bow and stern of the canoe, where it could be
drawn perpendicular to the grain of the wood to kind of shred and
then the wood could be smoothed out by using the scraper like a
plane: pushing it forward, with the grain.

West System has a number of additives that modify their epoxy to
give it useful working properties. Some of the additives are:
microballoons, collodial silica, various filleting blends and
graphite powder. Microballoons can be used to create a lightweight,
sandable surface that is good for filling the ends of the bow and
stern. Collodial silica jis thixotropic, it thickens the mixture
while still allowing it to flow enough to penetrate other surfaces.
It leaves a very hard, abrasion resistant surface. It is often used

18 HUT!-October 1988

Article contents & approved summaries (0)

No article summaries are available for this view.