← Back to The HUT

October 1988 · Vol. 24 No. 10

October 1988 Magazine (Vol. 24 No. 10)

Issue first-page cover

Magazine · 44 pages

For the full-resolution original, use Open PDF above. Your browser handles PDF zoom and navigation.

Scan page 7 of October 1988 Magazine (Vol. 24 No. 10)
Searchable text for scan page 7

of 2 x 2's. The canoe was built upside down and was stripped from
the bottom toward the gunwale. Many difficulties were encountered,
but the canoe had a good Peterborough shape and won the Aquatennial
race in 1947,

At this time, Eugene Jensen, a young 18-year-old upstart, bought
a 16-foot 1430 model Peterborough. Probably the only one of its kind
in the state. He teamed with Tom Estes, and together they won the
500-mile Aquatennial race in their first year of competition.

Concerned that competition would be tougher the coming year, Gene
and Tom decided to experiment and built an eighteen foot plywood
canoe on the order of the Chicago canoe, but with a much sharper "V"
shape in the bottom hull design. This was a very hard canoe to ride,
but they also won with this canoe in 1949,

Not to stand still at this point, in the winter of 1949-1950,
Gene and Tom built two twenty-foot long, thirty-inch wide, round
bottomed strip canoes with small ribs. The strips were glued with
Weldwood glue. The procedure of construction of these canoes was
similar to today's construction with a strongback and forms being
used, but after the canoes were stripped, they were removed from the
.strongback with forms still intact. The ribs were then steamed in
and nailed with copper nails. The forms were then removed and ribs
were added to fill the gap where the forms had been placed. The
strips were fitted very close, and no canvas was required. Needless
to say, Gene and Tom won their third Aquatennial race with one of
these canoes. ,

Many other builders were busy working by now, but Irvin C. (Buzz)
Peterson was getting a good start, especially in canoe design. The
Aquatennial race was fading by this time, but the big race was now in
Shawinigan, Quebec, Canada, and for this race, Buzz made three
round-bottomed canoes.

In 1954, he decided that ribs were not needed, so he built a 26
footer with no ribs. He edge-nailed the strips, used waterproof
glue, and fitted the strips perfectly so there would be no leaks. No
canvas was needed. ;

The following year during the winter of 1954-1955, he made a 30
footer, same construction, no ribs, but the strips were concave and
convex to make an easier perfect fit.

In 1957, Canadian Quebec rules shortened the canoes to 16 feet
with the now present 3-inch and 27-inch rules, so Irv built his now
famous 16 footer which js still owned by Gil Tinkler of Canada, and
won more major races than any other single canoe. Construction was
with concave and convex strips, Weldwood glue, edge-nailing, 3/8-inch
planking, and hand shaping with a rasp to get the lines wanted. On
this canoe he put on the first layer of fiberglass, but only on the
outside. Buzz and Tom Estes used it in Flin Flon, Canada, in 1958,
where Rene Belemare of Quebec, Canada saw it and reproduced it in
1959--the first built by a Canadian. It was also seen by Norm Brown
of Michigan, who rushed right home and built the first ribless canoe
in Michigan in 1959,

Since then there has been many claims for firsts, but all these
canoes were developed without any of the aforementioned men seeing
what the others were doing. It was a secret ritual, but all
eventually developed much the same thing. Thousands of years ago all
this was started and much was Jost, but now with written instructions
it is here to stay.

October 1988-HUT! 7

Article contents & approved summaries (0)

No article summaries are available for this view.