← Back to The HUT

July 1976 · Volume/issue not printed or unknown

July 1976 Magazine

Issue first-page cover

Magazine · 20 pages

July 1976 Magazine

Captured text — scan page 15

Automatically captured text may contain recognition errors. Compare it with the original scan.

August Activities Meeting

CANOE BUILDERS CONTEST & CANOE TRY-OUTS

The builders of the MCA will again display their Come and see how your boat stacks up against all
handiwork for fellow members to judge on Wednesday boats ever built by MCA members. This is your best
August 18, 7:00 p.m. at Broadway Bridge on the chance to meet fellow builders and see the latest designs
Mississippi. and building techniques.

Come and enter or vote for your favorite canoe in any NOTES:

of the following five classes:
1. Canoes 30 ft. and larger are not eligible to compete.

1. The classic wood strip - any design of cruising

canoe. 2. There is to be a follow-up contest to be in
2. Long distance racing canoe - any design and/or conjunction with the Minnesota State Fair. Space is limited
construction method. for display at the Fair Grounds, so our contest will serve as
8. Fiberglass hull - any cruising design. a preliminary screening for entries. Two categories will be
4. Fiberglass hull - any whitewater design canoe or scheduled:
kayak. A. Wood strip canoe (cruising or racing)
5. Restored classic - any canoe of sufficient age and B. Fiberglass Hull (open cruising or racing,
heritage that has been restored to useable condition. whitewater canoe or kayak)

Canoes are judged by all MCA members present.
Silver cups go to all winners of classes with 5 or more
entries. Certificates to all winners. No entry fee or other

red tape required. CANOE TRY-OUTS
There are no restrictions on entries as to year of A variety of commercially made canoes will be on hand
building or renovating. Judgement will be on appearance, for try-out. Also, if you have a model that you are willing
construction techniques, weight, quality of construction, to offer for try-out, please bring it to the meeting. It is
etc. Have your canoe there at 7:00 p.m. If you can’t make it suggested that everyone provide their own paddle and life
have a friend bring your canoe and enter it for you. preserver.
ATTENTION!

PLEASE NOTIFY THE MCA OF YOUR ADDRESS CHANGES SO THAT THE NEWSLETTER CAN REACH YOU
UNINTERRUPTED. IT WILL ALSO SAVE US ADDITIONAL TIME AND POSTAGE. SEND CHANGES TO: MCA BOX
14117, UNIVERSITY STATION, MINNEAPOLIS, MN 55414.

THEBESTOF | HiT =

a The lean, of course, is in the direction

Take Time to opposite to the turn. A left turn requires that
the right gunnel be dipped an inch or two.

Learn Offside Lean This little procedure takes practice. It is well

by Karl N. Ketter worth all the time it takes to master and perfect

the offside lean. Its major use is to improve and
smooth our sharp turns and to help counteract
those stubborn, arm-stretching sidewinds. Many
of the races in Michigan require a large amount
of turning to navigate the small twisting
streams. In this type of race, some of the better
teams can make corners entirely by leaning. It
is possible to make a very tight, smooth corner
to the right with the bowman on the left side
and sternman on the right — think about it.

Once the turn is accomplished by sliding the
stern around rather than drawing the bow
directly over (see June issue cf HUT!, “Turn
Canoe After It Has Proper Trim’’), it is possible
to control the sliding and the turn by the
amount of lean. The keel or stem point of the
canoe interferes with the swing of the stern. By
leaning the canoe just an inch or two, the water
more easily passes under the canoe, and the
stern swings easily to change direction of the
canoc and complete the turn.

Sega ee

——_. ee ~—
Sy

=. a

Figure 1. No lean. Swing of stera Figure 2. Offside lean. An oftside

is impeded by water catching the lean of an inch or two allows the

keel and point of canoe. water to pass keel and stem.

Page 13

Article contents & approved summaries (0)

No article summaries are available for this view.