← Back to The HUT

October 1981 · Volume/issue not printed or unknown

October 1981 Magazine

Issue first-page cover

Magazine · 16 pages

October 1981 Magazine

Captured text — scan page 11

Automatically captured text may contain recognition errors. Compare it with the original scan.

BUYING AN OPEN CANOE

by Kent Ford New molding techniques and different resins have
(Notes in parentheses by Bill Brown) made fiberglass and a rubberlike material called ABS
popular alternatives.

(From THE PADDLER'S GAUGE)
Canoes built with resin reinforced with glass cloth

Choosing an open canoe is becoming increasingly layers are loosely termed fiberglass construction. The
difficult because of the growing number of designs glass layers are put in a mold, then saturated with
and materials. Canoe designs range from delicate resin. Polyester resin is nearly always used now;
flatwater marathon canoes to indestructible white- however, in the future expect more widespread use of
water boats. (No boat is indestructible, not even a the better vinylester and epoxy resin. The glass
Coleman.) Similarly, there is a lot to know about layers. include standard E-glass, kevlar, and nylon;
canoe construction because of the development of each has different characteristics. E-glass, properly
molding processes for light, durable plastics. Gaining called fiberglass or just glass, is most common. It is
familiarity with the basics of design and construction cheap and strong, but tends to crack if flexed too
is an important part of the canoe choice process. far. On the other hand, kevlar is expensive but
This information helps the buyer determine his/her lightweight, extremely strong, and tends to flex
intended use and select an appropriate canoe. An without breaking its. strands. Nylon, like kevlar, is
uninformed buyer is likely to discover the hard way flexible but not quite as strong. Clues to shoddy
that ultralight racing boats seem to self-destruct in construction include sharp strands inside the boat, mat
whitewater, or that some canoes can go only half as or chopped strands instead of woven glass, resin
fast as marathon canoes. puddles, or white areas of insufficient resin.
Design. Canoes range from the speedy, but tippy, The other alternative material has the chemical name
marathon race boat to the maneuverable slalom canoe. Acrylontrile Butadiene Styrene, or ABS. It is a
By examining these two extremes in design, one rubberlike Uniroyal product. sold in sheets called
discovers basic hull characteristics. Royalex. Once molded into canoe shape, it is fairly
heavy, but slippery and resilient. Consequently,
Marathon canoes are designed to be raced over Royalex canoes are ideal for whitewater. Even if the
flatwater courses anywhere from five to 50 miles canoe wraps around a rock, upon removal and a little
long. This design allows the paddler to follow a persuasion, it will return to original shape.
straight course easily, saving him from wasting energy
on correction strokes, A canoe that goes straight One can see why plastics have replaced aluminum and
easily is said to have good tracking characteristics. wood/canvas canoes. Light fiberglass construction can
Translated to hull shape, this means it has a keel or a be molded to fast designs for flatwater paddling and
"y" shaped bottom. precision designs for whitewater. ABS cannot be
formed into sharp flatwater hulls; however, its
In contrast, slalom boats are designed to maneuver. bombproof character is valuable on whitewater.
They have flat hull cross sections and a bow to stern
hull curvature, called rocker, to increase turning ease. Conclusion. A buyer should determine the canoe's use
This shape reduces the length of the waterline, which before the search starts. For touring on flatwater,
in turn decreases the resistance to turning. one would want a "V" shaped hull with plenty of
; depth and length to accommodate extra gear. The
Most canoes combine the tracking ability of the same boat would ride high in the water without gear
marathon boat and the maneuverability of the slalom and be difficult to paddle in the wind. Fiberglass is
boat. For example, flatwater touring boats have best suited for this fast "V" hull design. Whitewater
shallow "V" shaped hull to promote easy tracking, but paddlers want to maneuver easily, so their boats have
have more stability than marathon canoes. Since flatter bottoms and more rocker. Fiberglass
these boats have to carry heavy loads of gear and construction, especially with kevlar or nylon
people, they are long and have high sides which reinforcement, is quite durable. Royalex canoes
provide enough space between the water line and the sacrifice some with their weight and rounded design;
gunwales (top edge of boat). However, this extra however, they are nearly bombproof. and maintenance
space, called freeboard, can make paddling in the free.
wind difficult. Downriver racing boats have a similar
design but use the extra freeboard to keep waves out Knowledge about design and construction helps the
and the boat dry. General purpose designs have a buyer determine his/her intended use and select an
fairly flat hull for stability and turning, and a little appropriate canoe. Paddling friends can _ help
rocker over moderate’ length for tracking. determine your needs, as can a dealer with paddling
Whitewater cruising canoes are similarly designed with experience. Local clubs can often provide assistance
a flat hull for turning ability and stability. (Flat and information about oddments such as sailing rigs,
bottomed boats have a high initial stability, often a poling, and good outfitting.

very low final stability. They require bracing strokes
to keep them upright in tight spots. They are deadly

when partly submerged. Flat bottomed boats don't
belong on whitewater unless paddled by an expert at

bracing.) (Editor's Note: This article covers the fundamentals
of canoe design and buying. It is intended to give

Construction. Traditionally, canoes have _ been the beginning canoeist some knowledge of the

constructed with aluminum or canvas over wood; different types of boats available.

however, these materials are rapidly being replaced

with plastics. Aluminum easily accumulates small In the past, our Builder's Corner has covered design

dents and scratches in addition to getting unbearably and construction in more detail, and Cliff's Corner

hot in the sun and acting like a sounding board for has covered the types of boats in practical usage. A

stray noises. Wood and canvas canoes are sleek and helpful tip: Be an informed buyer; look around.)

aesthetic; however, they are expensive. 11

Article contents & approved summaries (0)

No article summaries are available for this view.