December 1983 · Vol. 19 No. 12
December 1983 Magazine (Vol. 19 No. 12)
Magazine · 16 pages
Search this issue
December 1983 Magazine (Vol. 19 No. 12)
Captured text — scan page 13
Automatically captured text may contain recognition errors. Compare it with the original scan.
How do we pull these dimension considera- It's worth the effort, because all canoeists
tions together? To find the canoe you will desire stability and paddling ease. These are
be happiest with, choose one as long as possible conflicting design goals. The good designer
given your physical size and the corners you ean reconcile them by carefully plotting a hull's
must turn. Choose a slim canoe which gives transitional areas.
you a feeling of security. Choose a canoe no The same rules apply to the stern as to
deeper than required for the gear you will carry the bow. Fullness aft of center is good. So
and the waves you cross. To untrained eyes, is a sharp stern. This transition must be smooth
all eanoes look the same, but subtle differences also. The bow and bow transition area are more
have a major impact on performance. important. Thus performance-oriented canoes
Canoes float and move like yachts, barges are fullest behind the midpoint. This is called
and battleships. A canoe displaces water equal "asymmetrical;" the bow end is smoother at
in weight to the total of hull and contents. the expense of the stern. The result is net
Canoes move through water pushing it aside gain in hull efficiency.
and then allowing it to be replaced. A hull Viewed from the side, the bottom of a
interacts with water in ways determining speed, canoe may be straight, may curve up at the
eapacity, maneuverability and stability. ends, or may be curved from bow to stern.
Consider the bow entry line, bow sharp- The curve called "rocker" plays a major role
ness. The sharper the better for streamlining in performance.
and tracking. Limiting factors are manufactur- A hull with lots of rocker will turn on
ing difficulty and bow durability. Kevlar and a dime... but, you may have trouble going
fiberglass canoes ean have very sharp bows, straight. With rocker, the bow and stern ride
unless they are intended for whitewater. Here, higher than the center. They don't hinder turn-
the bow should be more blunt to resist impacts. ing and offer less help going straight. Rocker
From the bow back, notice how quickly makes a hull "shorter" than it is, increasing
the hull widens. This has an effect on speed maneuverability but reducing streamlining.
capacity and stability. For greatest speed, Continued Next Month
a hull should widen slowly and smoothly. A
flatwater racing canoe may not reach full width
until behind its midpoint. These hulls are very eae
narrow. Their widest section is only a small a‘
part of the total length. These are called \Oe
"diamond-shaped" canoes, and don't need high
capacity nor stability. Paddling them are ex-
perts without gear. For most canoeists, a
diamond hull is not ideal. kta Gta Hew. dd
To achieve stability and capacity, a hull one per customer
should widen soon and stay: wide long. This not valid with any other coupon
is one way shape affects stability as much as 5= SE >» = oor)
width does; a hull moderately wide over a long
distance can be more stable than one with
greater width over a shorter distance. C if
Cross~section of stem of a mono— : / Ca
cotyledon (corn), ity ?
Cross-section of herba- eXC Ski headquarters eWarm clothing
ctous dicot stem Ey = galore e Over 20 Swiss Arny Knive
cambium— VB styles oMany Sunglasses eGaitors eHats
NZ © Socks eScarves eGloves eWool Shirts
Wool Sweaters e Polypropylene Underwear
Center eSorel Boots e Fanny Packs eBook
This aspect of canoes is called "fullness." Bags eBooks
Extra fullness has a penalty: reduced speed
and increased paddling effort. If the transition
from sharp bow to full mid section is smooth
the penalty can be small. There are no formulas MIDWEST MOUNTAINEERING
309 Cedar Ave. So., Mpls. * 339-3433 » Weekdays til 9, Sot. 104
for fullness design. The only way is to experi- Pork free across the street behind Coesar’s Bat
ment with prototypes, testing, revising, and Ask us. We've been there.
testing again.
HUT! i3
Article contents & approved summaries (0)
No article summaries are available for this view.