February 1984 · Vol. 20 No. 2
February 1984 Magazine (Vol. 20 No. 2)
Magazine · 16 pages
Search this issue
For the full-resolution original, use Open PDF above. Your browser handles PDF zoom and navigation.
Searchable text for scan page 5
When these hulls are
removed from the mold
the gunnel has the
exact shape it needs
to hold the boat in
shape.
The simplest gunnel
of all? Leave it to
the master, Gene
Jensen had a better
idea. Figure 4
illustrates the
gunnel design on the
in with a good water proof glue and leave
then slightly long. When these gunnels
are sanded smooth they really look classy. Vinnie Chesed
Rather than rout out the vents many Cael Cuaael
builders choose to add spacer blocks.
This is easier and requires less wood than
the routed gunnels. The strength is the
same. The looks is never quite as good.
Figure 3 shows a
Outre Cunel cross section of a
<-imer gunnel that can be
Clamp your gunnel parts in place, drill ;
and dowel them together. Glue the dowels A fig Mo 4
h /
GCunne used to raise the latest Jensen boats.
sides of a canoe.
ee Sif The rabbeted outer RABE
gunnel sits atop the
hull, it is installed
Fig Mo 3 first and the inner
gunnel added after.
I used to feel
that gunnels must run OWN. A QUALITY CANOE
continuously the BUILD YOUR OWN WOOD STRIP CANOE
length of the boat. ATTEND FEBRUARY 18 BUILDERS SHOW
No longer. I've seen
too many neat ideas
using segments of
gunnels.
One solo racer I've seen has outer gunnels
on the forward and aft third of the hull laeic
and inner gunnels in the center half. The America's
sections overlap making the system quite Number
sturdy and the beam at the center of the One
hull has been kept narrower. This gunnel F
system was easy to do and didn't require Selling
long sections of wood. Kayak
Often seats and thwarts are bolted
directly to the gunnels. This means that
the inner gunnel must be large enough to
stand a hole through it to accept the
bolt, yet still be strong. The entire "#6
gunnel need not be this size. The inner ag
/ Nez a . ~
Em ee eo =
i eee ee
PE. ;
Siw.
Te > i “ee ~
wit Mirage™
gunnel can be built up of pieces of : Dancer™
various thickness. Eclipse™
Racers are quick to part with tradition HD-4™
when it doesn't help them go fast. Many EL Accessories™
racing canoes have tucked-in sides and 740 W. 98th St.
other 'odd' shapes. These shapes could Bloomington, Minn. 55420
not be maintained using traditional a
gunnels. The stiffness would fair up the top cseeolae ol eam
sides removing much of the asymmetry. Minneapolis, Minn. 55454 -
Wenonah Canoe Co. has found a very simple perception
solution. They make a laminated inner ee Hardware & Sports © 1. see color catalog:
. | enter Ave. Perception
gunnel that is cemented together in place Moorehead, Minn. 56560 Dept. MCA, P.O. Box 686
while the hull is still in the mold; good Liberty, SC 29657
going Mike. (803) 859-7518
HUT! 5
Article contents & approved summaries (0)
No article summaries are available for this view.